Folding Grip for Sony A1 II / A9 III and A7R VI camers

Designed for photographers on the move, the FOGRIP Folding Camera Grip combines comfortable handling with compact storage. Its globally patented folding design addresses the discomfort of holding a compact camera body with larger hands, where much of the camera's weight rests on just three fingers. Compatible with three professional Sony camera models, this grip makes upgrading your camera or working with two bodies simple and seamless.

Features

Why Choose FOGRIP?

  • Compatible cameras: Sony A1 II / A9 III / A7R VI.
  • The globally patented concealed folding design allows the camera to sit flat on a table. Extend or fold the grip quickly with one hand.
  • Made from high-strength, aerospace-grade aluminum alloy, with a total weight of just 76 g.
  • Replace the battery without removing the grip, so you can keep shooting with minimal interruption.
  • Both the base and the optional vertical quick-release plate support quick-release tripod mounting.
  • Add the optional 8.0 cm side plate to create an L-bracket system for quick switching between landscape and portrait orientations, while maintaining access to USB-C and other side ports.
  • A contoured cushioning piece at the front bridges the height difference between the camera body and the grip, improving comfort and providing additional cushioning in the event of an accidental drop.

Recommended Use

Lightweight mirrorless cameras have compact, narrow bodies. When shooting handheld with a heavy or large telephoto lens, adjust your hand position periodically and avoid prolonged pressure on a single point of your palm to help reduce discomfort.

Installation Notes

This version fits all three listed camera models. The A7R VI body is approximately 3 mm narrower. When installing the grip on the A7R VI, align it with the outer edge of the battery compartment opening on the left, and slide the mounting screw to the left before tightening it in the correct position.

To open the battery door, first unfold the hinged support plate fully into a straight, unbent position. The battery door can then be opened directly.

Frequently Asked Questions

How should I align the grip when installing it on the Sony A7R VI?
The A7R VI body is approximately 3 mm narrower. Align the grip with the outer edge of the battery compartment opening on the left, then slide the mounting screw to the left before tightening it in the correct position.

What should I do before opening the battery door?
Fully unfold the hinged support plate into a straight, unbent position. You can then open the battery door directly without removing the grip.

Do I need a separate quick-release plate for my tripod?
No additional plate is needed for Arca-Swiss-compatible tripod heads. For other systems, mounting holes on the underside allow you to attach a suitable quick-release plate.

Which strap attachments can I use with the grip?
The attachment points on both sides accommodate Peak Design anchors and thin strap loops. Used together with the wrist strap attachment point on the right side of the grip, these allow the camera to hang with the lens pointing downward, helping reduce the risk of bumps associated with outward-facing lenses when using the camera's original strap attachment points. The wrist strap attachment point can also be used with an STC antibacterial plant-fiber wrist strap or camera strap.

Can I replace the front cushioning piece with a different color?
The front cushioning piece is available only in the supplied color configuration and is not offered as a separately interchangeable part.

About This Product

Features

Please Note:

  • The side plate included with the “A1 II / A9 III / A7R VI Grip + 8.0 cm Adjustable Side Plate” option consists of an 8.0 cm base and a 2.0 cm extension block.

SHOT WITH STC FOLDING GRIP FOR SONY A1 II / A9 III AND A7R VI CAMERS